New Letina C313F4P2 - Pressure tank (2,0 bar) food tank
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+385 99 163...
Show
+385 99 163 5004
6,080 kg
Croatia, Čakovec
32,100 kg
Net weight
5,900 kg
Croatia, Čakovec
31,800 kg
Net weight
6,200 kg
Croatia, Čakovec
6,180 kg
Italy, Ornago
China, Jinan
Turkey, Konya
5,800 kg
Italy, Ornago
5,950 kg
Italy, Ornago
25,000 kg
Net weight
8,000 kg
Turkey, KONYA/KARATAY
6,200 kg
Poland, Brzeg
5,900 kg
Ukraine, Odessa
Spain, San Vicente del Raspeig (Alicante)
5,550 kg
Italy, Ornago
5,890 kg
Poland, Brzeg
5,890 kg
Poland, Brzeg
Type: L01
Vehicle Code: C313F5R2
Description: Stainless steel Tank for transportation foodstuff and non-dangerous liquids,
with a capacity of approximately 31,500 Liters,
divided into 3 compartments (12,000L + 6,000L + 13,500L),
thermally insulated – according to ATP regulations, operating pressure 2,0 bar, test pressure 2,6 bar.
Technical description:
Tank:
Made of AISI 304 (DIN 1.4301) quality stainless steel material, with a filling manhole on each compartment, with stainless steel inner rings
• Tank Volume: 31.500 Liters (+/- 2%)
• Number of Compartments: 3 (12,000L / 6,000L / 13,500L)
• Manholes:
o 3 x Filling manholes, size DN500
o Each manhole cover has safety relief valve +2.0 Bar / -0.2 Bar
o Each manhole cover has anti-accidental closure hook
• Manhole Spill Box, Square Design:
o On the top of the vessels
o Stainless steel, insulated
o 2 hinged lids with lock, insulated
• Insulation and Cladding: - According to ATP "IN"
o Body Insulation: approx. 50 mm polyurethane
o Tank Heads Insulation: 100 mm glass wool
o Insulation Cladding: Stainless steel
o Bottoms Cladding: Fiberglass – RAL 7016 Anthracite Grey
• Operation Pressure:
• operating pressure 2,0 bar, test pressure 2,6 bar
• Pressurized system: combined with CIP washing system, connection for air filter with „T“connection at front right side, with pressure gauge.
• Walkway: Aluminium anti-slip walkway along the tank and around manhole catch basins, on the right side.
• Handrail: Folding handrail in stainless steel
• CIP - washing system: Inlet in tank left side, 5 independent spray heads (2+1+2) and a shut-off valve for each spray head, stainless steel pipeline DN50 connection on the rear right side
• Hose Deflectors: Bar to protect the insulation and cladding of the tank installed on the upper right and left sides of the tank
• Ladder: Stainless steel ladder with non-slip steps located at the back of the tank
• Ladder for entering the tank: Stainless steel ladder – on the top of the tank
Discharge System
• Bottom Valves: 3 x DN100, with handwheel control on the top
• Discharge Line: 1 x DN100 Discharge pipe insulated and covered with black tape, output at the rear centrally in discharge box with double doors.
• Discharge Valves: DN100 butterfly outlet valve with cap, manually operated, in outlet box
Chassis:
Technical description:
Berger Ecotrail, model SATA 10.5 - galvanized
Coupling height: 1150 mm
Tires/rims: Continental / 385/65 R 22,5 / aluminium rims – Alcoa DuraBright
Welded frame construction made of fine-grained steel S700
Partly zinc coating for tank chassis, upper chord, external web plate, lower chord ahead, front and rear closure
3 × SAF-axles, ET 120, Integral disc brake 22,5"
1st axle liftable, Wabco, fully automatic; lift only during drive from 16 km/h
(ATTENTION: ground clearance for LTMn/LTMCn approx. 120mm)
Automatic traction equipment, if the truck has activated its ASR and sends information by CAN to the trailer. (also above 30 km/h)
(Serial equipment of traction equipment to be activated by brake pedal or by switch up to 30 km/h)
Starting assistance (forced lowering / lifting) via lifting axle, electrically controllable via PIN 12 (by push-button in the truck)
RDKS SCB-CTU (6-wheels with Tire pressure monitoring sensors)
6 × Splash guard mounted at all mud guards
Wabco EBS brake system, E Generation 2S/2M, spring-controlled parking brake with double release valve, conventional air suspension with rotary slide valve
RTR (Reset-to-Ride) automatic reset of the air suspension (lifting/lowering valve) to driving level
Coupling head standard (air connections red/yellow)
Seat posts, brand „Jost“, with thrust compensation
Stainless steel package:
Fender bracket, socket bracket, light carriers foldable incl. bracket and screw fitting for supporting device.
Shim with holder (2 pcs.)
Side protection fix mounted, naturally anodized aluminium, standard version - for SATA / SAAG
Sockets on the front wall, 2×7 pins and 1×15 pins (DIN ISO 3731/12098)
Spare wheel holder in winch version in front of the 1st axle right side
Lighting and Accessories:
24 volts lighting system, type Hella, multifunctional rear lighting (including rear fog lamp and reversing light),
2 clearance lights with rubber arms (LED),
2 clearance lights (LED) on the front wall,
4 pairs of side marker lights (LED)
2 X Reversing light LED on the rear underride
Colors
• Chassis Color: RAL7016
• Bottoms Cladding: RAL7001
• Axle Color: RAL 9005 Jet Black
WE ARE LOOKING FOR DISTRIBUTION PARTNERS!
Expand your product range with the high-quality Letina tank trucks.
If you are interested in representing our products in countries where we do not yet have a distribution network, please contact us. We are looking for reliable partners for long-term cooperation.
Want to learn more?
For a detailed quote, technical specifications, or further information, please contact us.